Loading ...
Loading ...
Loading ...
● Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to adjust the watch’s time
setting based on your phone's time, perform
the procedure below to connect with a phone.
1.
X
Press (D).
This causes
e
and to flash on the
display.
e
will stop flashing when a
connection is established between the
watch and phone, and the watch’s time
setting will be synchronized with that of
the phone.
Trying to connect
Following time
correction
Note
●
The connection is terminated
automatically after time adjustment is
complete.
●
If time adjustment fails for some
reason, the watch will return to the
Timekeeping Mode without changing
its time setting.
Viewing Pedometer Data
BABY-G Connected can be used to view the
data below, which is measured by the watch.
●
24-hour step count, exercise intensity, and
physical exertion
●
Whether or not there is a stopwatch
measurement or timer measurement
(24 hours of data displayed by dividing it into
30-minute segments.)
●
Weekly number of steps, calories burned
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (D) for at least two seconds.
Release the button when
e
and start
to flash.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Follow the instructions on the screen to
display pedometer data.
Note
●
You can also use BABY-G Connected
to specify a daily step target.
●
Though the step count is displayed on
the watch in real time, BABY-G
Connected displays step counts at the
top of each hour and every half hour.
Because of this the step counts
displayed by BABY-G Connected may
be different from those displayed by
the watch.
Viewing Stopwatch Data
This section explains how to send lap times
and split times (up to 200 records) stored in
watch memory, and other data to your phone
for viewing with BABY-G Connected.
● Sending Stopwatch Data to a Phone
Use the procedure below to send data from
the watch to a phone.
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (D) for at least two seconds.
Release the button when
e
and start
to flash.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
●
Tapping a stopwatch data item displays
its details.
● Checking Sent Data
Use BABY-G Connected to check the data
you sent to the phone.
1.
Y
Tap the “BABY-G Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
●
You can delete data by tapping “Edit”.
Operation Guide 5556
5
Loading ...
Loading ...
Loading ...