Loading ...
Loading ...
Loading ...
Connecting to External Devices
Related information
Use HDMI&CEC on page 17
Connecting Speakers or Other Audio Receivers
To connect speakers or other audio receivers with an audio cable (not provided), see the illustration below.
Ensure the audio connected devices are switched on before switching on the Laser Console.
When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the Laser Console
volume, and use your digital audio system to control the volume.
Note:
• If you prefer to use Audio Return Channel/Enhanced Audio Return Channel, please refer to Connecting to
External Devices > Connecting a Digital Audio System with ARC/eARC in this manual.
•
You can connect the DIGITAL AUDIO OUT port on the back of the Laser Console to the optical port on the
amplifier. Then go to > Settings > Display & Sound > Audio Output > Digital Audio Out to choose
to select Dolby Audio - Dolby Digital to receive the Dolby Digital audio.
Related information
Select Speakers on page 32
Connecting a Digital Audio System with ARC/eARC
If you would like to use the Audio Return Channel (ARC)/Enhanced Audio Return Channel (eARC) feature
to send sound from the Laser Console by a HDMI cable to a digital sound system, you can connect it to the
HDMI (ARC/eARC) port of your Laser Console.
By using this feature, you can also control the sound system with your Laser Console's remote instead of
using the remotes for each device.
After the connection:
1. Power on the sound system.
2.
Press button on your remote control to select Settings > Display & Sound > Audio Output > Audio
Output > ARC. If the device supports eARC function, Press button on your remote control to select
Settings > Display & Sound > Audio Output > eARC.
Note:
• Audio receiver must support ARC/eARC function.
• If the device has an Input Selector feature, then make sure to change it to Laser Console.
• When this port is used for ARC/eARC function, it can be used as signal input when a DVD is connected to
an amplifier and the amplifier is connected to the Laser Console at the same time. Some amplifiers may
not support series connection.
•
5.1 CH (channel) audio is available when the Laser Console is connected to an external device that
supports 5.1 channel surround sound. You can press button on your remote control to select Settings
> Display & Sound > Audio Output > Digital Audio Out to choose Dolby Audio - Dolby Digital Plus to
receive the 5.1 channel audio.
Related information
Select Speakers on page 32
22
Loading ...
Loading ...
Loading ...