Loading ...
Loading ...
Loading ...
36
Figure 4-11 Sample List Tab Page
The Auto Scan function performs a comprehensive scanning of all the systems in the
vehicle ECU to locate faults and retrieve DTCs. Tap Fault Scan to start. Systems with
no faults detected will display in green; systems containing faults will display in orange.
Column 1 – displays the system numbers.
Column 2 – displays the scanned systems.
Column 3 – displays the scan results.
-!-: Indicates that the scanned system may not support the code reading
function, or there is a communication error between the tester and the control
system.
-?-: Indicates that the vehicle control system has been detected, but the tester
cannot access it.
Fault | #: Indicates there is/are detected fault code(s) present; "#" indicates
the quantity of detected faults.
Pass | No Fault: Indicates the system was scanned and no fault has been
detected.
Not Scanned: Indicates the system has not been scanned.
No Response: Indicates the system has not received a response.
To perform Auto Scan function
Take topology for BMW as an example:
1. Tap the Diagnostics application button on the MaxiSys Job Menu. Choose the
corresponding vehicle information and enter the vehicle diagnostic page.
Loading ...
Loading ...
Loading ...