Loading ...
Loading ...
Loading ...
9
10. Oscilloscope LED - flashes green when operating in the oscilloscope mode
11. Vehicle LED - refer to Table 2-6 Vehicle LED Description for details
IMPORTANT
Do not disconnect the programming device while the vehicle LED status light is on! If the
flash programming procedure is interrupted while the vehicle's ECU is blank or only
partially programmed, the module may be unrecoverable.
Figure 2-7 VCMI Bottom View
12. Ethernet Port
13. Vehicle Data Connector (DB26-Pin)
14. Input Channel A
15. Input Channel B
16. Input Channel C
17. Input Channel D
Table 2-4 Power LED Description
LED
Color
Description
Power
Yellow
Lights yellow automatically at power up when VCMI is self-
testing.
Green
Lights solid green when powered on.
Red
Lights solid red when system failure occurs.
Flashes red when VCMI is upgrading.
Table 2-5 Battery LED Description
LED
Color
Description
Battery
Green
Flashes green when VCMI is charging.
Lights solid green when fully charged or the battery
level is above 50%.
Loading ...
Loading ...
Loading ...