Loading ...
Loading ...
Loading ...
270
device will start to search for available units.
7. Depending on the VCMI type you use, the device name may display as Maxi
suffixed with a serial number. Select the appropriate device for connection.
8. When connection is established, the connection status displays as Connected.
9. The VCMI button on the system Navigation bar at the bottom of the screen
displays a green Wi-Fi icon, indicating the tablet is connected to the VCMI
device.
10. To disconnect the device, tap the connected device listing again.
11. Tap Back on the top left to return to the MaxiSys Job Menu.
NOTE
To ensure quick connection, please perform this operation in a steady network
environment.
11.2 BT Pairing
BT Paring is the basic way for wireless connection. The VCMI device needs to be either
connected to a vehicle or to an available power source, so that it is powered up during
the synchronization procedure. Make sure the tablet has a charged battery or is
connected to an AC/DC power supply.
Figure 11-3 Sample BT Pairing Screen
To pair the VCMI device with the tablet
1. Power on the tablet.
2. Connect the 26-pin end of the data cable to the VCMI's vehicle data connector.
Loading ...
Loading ...
Loading ...