Loading ...
Loading ...
Loading ...
103
Name
Button
Description
Start
Tap to start the oscilloscope and initiate sampling.
Stop
Tap to stop the oscilloscope and terminate sampling.
Presets Menu
Tap the vehicle icon button in the top navigation bar to enter the Presets Menu. This
menu offers a wide variety of preset guided information for you to view.
The frequently used test components and options are listed in the presets menu:
Actuators - Test the common car actuators such as injectors, fuel pumps, and
canister purge solenoids.
Battery Charging - Test the functions related to car charging, including current
and voltage idle test.
Combination Test - Combined test of the vehicle's sensors or actuators, such as
the crankshaft position sensor and camshaft position sensor test; the primary
ignition and crankshaft position test; the throttle position sensor and front oxygen
sensor test.
Data Communication - Test the vehicle communication buses including CAN-bus,
LIN-bus, and K-Line.
Engine Starting - Test the functions related to car starting, including starting
current and voltage test.
Ignition Systems - Test the ignition process of the vehicle, including the voltage
and current test of the primary and secondary ignition.
Sensors - Test the common car sensors such as oxygen sensors, camshaft
sensors, and crankshaft sensors.
NOTE
Do not connect to High-voltage control signal such as the ignition control wire. It may
cause the damage to the product. The measured voltage value during the actuator
test may be different from the actual value.
To use the Presets menu
1. Tap the Presets button in the top navigation bar. A submenu opens.
2. Tap the desired test component or option in the left column.
Loading ...
Loading ...
Loading ...