Loading ...
Loading ...
Loading ...
239
Waveform Mode
This mode allows you to view the test result in a waveform form. This mode offers greater
details and offers a larger number of configuration options.
The screen is displayed in the Indicator mode by default.
Tap the View Waveform button in the lower corner of the Indicator Mode screen to
switch to the Waveform Mode. The screen is shown as below.
Figure 7-13 Sample Waveform Mode Screen
Main View Section
The main view section features as a coordinate grid with X-axis and Y-axis, representing
the time duration and amplitude level respectively. The amplitude level can be configured
in the Amplitude Settings and the time duration can be set in the Time Base Settings.
Channel Selection
Each channel has two conditions: selected and unselected. Some operations depend on
the selected condition of the channel, such as measurement rulers, waveform
movements and waveform zooming.
To select and unselect the channel
1. Tap the zero baseline marker or the Y-axis (the line thickens when selected).
2. Tap the zero baseline marker or the Y-axis again to exit the channel selection.
Loading ...
Loading ...
Loading ...