Loading ...
Loading ...
Loading ...
94
signal transmission.
Secondary Ignition Pickup (SA273)
The BNC connector is connected to the oscilloscope to
measure the secondary ignition voltage of conventional
ignition systems and most HEI (High Energy Ignition) and DIS
(Distributorless Ignition) systems.
Scope Test Lead
(Red: SA005, Green: SA006, Blue: SA007, Yellow: SA008)
The BNC connector is connected to the oscilloscope, and the
4mm banana plug is connected to various probes.
Breakout Lead (SA151)
Enables easy access to existing automotive wiring harness
connectors for obtaining signals of various sensors. Four sizes
are available: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm.
Flexible Back-pinning Probe (Red: SA053, Black: SA054)
Designed for back-probing under the insulation of multi-plug
terminals to detect the signal of the test component. The
flexible part can be bent and access to difficult areas. The
probe tip is not replaceable.
Back-pinning Probe Set (SA051)
Designed for back-probing under the insulation of plugs to pick
up the signal of the test component. The probe tip is
replaceable.
Multimeter Probe (Red: SA055, Black: SA056)
Designed for connecting exposed wires or terminals.
Loading ...
Loading ...
Loading ...