Loading ...
Loading ...
Loading ...
120
RS232/UART: Universal Asynchronous Receiver/Transmitter (UART) is the
communication interface found in the serial or COM ports once commonly
found on computers. Each channel of data is transmitted on a single wire pair
using an electrical standard such as RS232.
I2S: Inter-IC Sound (I2S) is a serial protocol used in digital audio devices for
communications between circuits such as CD transports and audio DACs.
I2C: Inter-Integrated Circuit (I2C) is a way to connect peripheral chips in
consumer electronics products and is widely used in embedded systems.
USB (1.0/1.1): Universal Serial Bus (USB) is widely used in personal
computers and tablets for communication.
Baud Rate: The baud rate will display a default value, which needs to be manually
set according to the actual signal to get the correct decoding result.
Threshold: The voltage that defines the transition in either direction between high
logic state and low logic state.
Name: The name of the protocol that you have selected above. The channel and the
corresponding protocol name will display in the scope view after selection.
Display Setting: You can also choose a display mode for the decoded data: Hex or
Binary.
To make the decoding settings
Using CAN High as an example.
1. Tap the Settings button in the top navigation bar. A dialog box opens.
2. Select the Mode option in the dialog box and tap the Oscilloscope Mode.
3. Select the Decoding Setting in the dialog box.
4. Select the channel(s) that you want to set, and then select the "CAN High"
protocol from the dropdown list.
Loading ...
Loading ...
Loading ...