Loading ...
Loading ...
Loading ...
23
NOTE
If no VCMI device is found, this may indicate that the signal strength is too weak to be
detected. Reposition the VCMI device, and remove all possible objects that may cause
signal interference. Tap the Scan button at the top right corner to rescan for VCMI.
4. Typically, the VCMI device name displays as Maxi suffixed with a serial number.
Select the VCMI device for pairing. (If more than one VCMI is used in the shop,
ensure the correct VCMI is selected to pair.)
5. When pairing is successful, the connection status displays as Connected.
6. The VCMI icon on the tablet Navigation bar at the bottom of the screen displays
a green circle BT icon when the tablet and the VCMI are connected.
Refer to
BT Pairing on page 270 for additional information.
Wi-Fi Connection
The VCMI device supports 5GHz Wi-Fi connection. In open areas, the working range of
5G Wi-Fi communication is up to 164 feet (50 m).
To pair the tablet with the VCMI device via Wi-Fi
1. Power up the tablet.
2. Select the VCMI Manager application from the MaxiSys Job Menu.
3. When the VCMI Manager application is opened, the tablet automatically scans
for available VCMI devices for Wi-Fi connection. Found VCMI devices are listed
in the Setting section on the right side of the screen.
4. Typically, the VCMI device name displays as Maxi suffixed with a serial number.
Select the required device for connection.
5. When pairing is successful, the connection status is shown as Connected.
6. The VCMI icon on the tablet Navigation bar at the bottom of the screen displays
a green circle Wi-Fi icon when the tablet and the VCMI are connected.
Refer to
Wi-Fi Connection on page 269 for additional information.
USB Cable Connection
After properly connecting the USB cable from the tablet to the VCMI device, the VCMI
navigation button at the bottom bar of the screen displays a green check mark, and the
USB LED on the VCMI device lights solid green, indicating the connection between the
devices is successful.
The MaxiSys diagnostic platform is now ready to perform vehicle diagnosis.
NOTE
Since the USB connection provides the most stable communication and is the
recommended communication method between the tablet and VCMI when operating
Loading ...
Loading ...
Loading ...