Loading ...
Loading ...
Loading ...
26
--------
Notes
▯ Slight differences in color on the front of the appliance
are caused by the use of different materials, such as
glass, plastic and metal.
▯ Shadows on the door panels, which look like streaks,
are caused by reflections made by the interior lighting.
▯ Enamel is baked on at very high temperatures. This
can cause some slight color variation. This is normal
and does not affect operation.
The edges of thin trays cannot be completely
enameled. As a result, these edges can be rough. This
does not impair the anti-corrosion protection.
Surfaces in the cooking compartment
The slightly textured surface of the back wall, ceiling and
sides in the cooking compartment are self-cleaning.
The cooking compartment floor is enameled and has a
smooth surface.
Cleaning Enamel Surfaces
Clean the smooth enamel surfaces with a dish cloth and
hot soapy water or a vinegar solution. Dry with a soft
cloth.
Soften baked-on food residues with a damp cloth and
soapy water. If there are heavy deposits of dirt, use a
stainless steel scouring pad or oven cleaner.
NOTICE: Never use oven cleaner in the oven cavity
when it is still warm. This may damage the enamel.
Remove all food remnants from the oven cavity and the
appliance door before you next heat up the appliance.
Leave the oven cavity open to dry after cleaning.
Note: Food residues can leave a white coating
behind.These are harmless and do not affect
performance. You can remove these residues using
lemon juice if required.
Cleaning self-cleaning surfaces
The self-cleaning surfaces are coated with a porous,
matte ceramic layer. This coating absorbs and dispels
splashes from baking and roasting while the appliance is
in operation.
If the self-cleaning surfaces no longer clean themselves
sufficiently and dark stains appear, they can be cleaned
using the cleaning function. To do this, refer to the
information in the relevant section. ~ "Cleaning
function" on page 26
9 CAUTION
Do not use oven cleaner on the self-cleaning
surfaces. These will damage the surfaces. If oven
cleaner does get onto these surfaces, dab it off
immediately using water and a sponge cloth. Do not
rub the surface and do not use abrasive cleaning
aids.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not build
up.
Tips
Clean the cooking compartment after each use. This will
ensure that dirt cannot be baked on.
Always remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately.
Use suitable ovenware for roasting, e.g. a roasting dish.
Cleaning function
The self-cleaning surfaces in the cooking compartment
are cleaned with the "EcoClean" cleaning function.
The self-cleaning surfaces (back panel, ceiling panel and
side panels) are coated with a porous, matt ceramic
material. This coating absorbs and breaks down
splashes from baking, roasting and grilling while the
oven is in operation. If the surfaces no longer clean
themselves adequately and dark patches appear, the
surfaces can be cleaned by the cleaning function.
Note: The appliance records the number of times it is
used. The appliance indicates when it has reached a
point in time after which cleaning is recommended. The
recommendation is displayed until the cleaning function
has finished.
If you do not act on this recommendation, the self-
cleaning surfaces may become damaged.
If your appliance becomes prematurely dirty or if you
notice dark patches on the back panel, do not wait until
your appliance recommends cleaning to do so. The more
often the appliance is cleaned, the longer the self-
cleaning surfaces will retain their cleaning capability. You
can clean your appliance at any time needed using the
cleaning function.
Appliance interior
Enamel sur-
faces and
self-cleaning
surfaces
Observe the instructions for the surfaces
of the cooking compartment that follow
the table.
Glass cover
for the inte-
rior lighting
Hot soapy water:
Clean with a dishcloth and then dry with
a soft cloth.
If the cooking compartment is heavily
soiled, use oven cleaner.
Door seal
Do not
remove.
Hot soapy water:
Clean with a dish cloth.
Do not scour.
Stainless
steel door
cover
Stainless steel cleaner:
Observe the manufacturer's instructions.
Do not use stainless steel care prod-
ucts.
Remove the door cover for cleaning.
Rails Hot soapy water:
Soak and clean with a dish cloth or
brush.
Accessories Hot soapy water:
Soak and clean with a dish cloth or
brush.
If there are heavy deposits of dirt, use a
stainless steel scouring pad.
Loading ...
Loading ...
Loading ...