Loading ...
Loading ...
Loading ...
EFORE YOU CALL FOR
FOR MOST CONCERNS t TRY THESE
FIRST:
° Check if oven controls have been prop-
er[y set.
° Checkto be sure plug is securely inserted
into receptacle.
• Checkor re-setdrcuit breaker. Check or
replace fuse.
° Check power supply.
PART OR ALL OF APPLIANCE DOES
NOT WORK.
NOTE: On Canadian models during a
sell-dean cycle - glass-ceramk cooking
surface will not opera!:e.
° Check if surface and/or oven controls
have been properly set. See pgs. 4 & 7.
• Check if oven door is unlocked after self-
dean cycle. See pg. [4.
• Check if oven is set for a delayed cool< or
dean program. See pgs. 8 & 14.
° Check if Control Lock is activated. See pg.
12.
BAKING RESULTS ARE NOT AS
EXPECTED OR DIFFER FRO2V_
PREVIOUS OVEN.
• Hake sure the oven vent has not been
blocked. See pg. [3 for [ocaqon.
° Check to make sure range is [eve[.
• Temperatures often vary between a new
oven and an old one. As ovens age, the
oven temperature often "drifts" and may
become hotter or cooler. See pg. [2 for
instructions on adjusting the oven tem-
perature. NOTE: It is not recommended
to adjust the temperature if only one or
two recipes are in question.
° Checkthat oven temperature is decreased
by 25 ° F when convect baking.
° See "Cooking Made Simple" booklet
for more information on bakeware and
baking.
FOOD IS NOT BROILING PRO-
PERLY OR SMOKES EXCESSIVELY,
° Check oven rack positions. Food may be
too dose to dement.
° Broil dement was not preheated.
° Aluminum foil wasincorrectly used.Never
line the broiler insert with foil
• Oven door was closed during broiling.
Leave the door open to the first stop
position (about 4 inches).
• Trim excessfat from meat before broiling.
• A soiled broiler panwas used.
OVEN WILL NOT SELF-CLEAN.
° Check to makesure the cycle is not setfor
a delayed start. Seepg. [4.
° Check if door is closed.
OVEN DID NOT CLEAN PROPERLY.
° Longer cleaning time may be needed.
• Excessive spiiiovers, especially sugary and/
or acid foods, were not removed prior to
the self-clean cycle.
OVEN DOOR WILL NOT UNLOCK
AFTER SELF-CLEAN CYCLE.
° Oven interior isstill hot. Aiiowaboutone
hour for the oven m cool after the comple-
tion of a self-cleancycle. The door can be
opened when the LOC indicator word is
not displayed.
OLASS-CERAMIC SURFACE SHOWS
WEAR.
l oTinyscratches or abrasions.
• Hake sure cooktop andpan bottom are
dean. Do not slide glassor metal pans
across top. Hake sure pan bottom is
not rough. Use the recommended
cleaning agents. See pg. [5.
2°Hera[ marks.
• Do not slide metal pans across rap.
When cool, clean with Cool<top
Cleaning Creme. See pg. 15.
$oBrown streaks and specks.
• Spills not removed promptly. Wiping
with soiled cloth or sponge. Pan
bottom not clean.
&Areas with a metallic sheen.
" Mineral deposits from water and food.
[8
5oPittingor flaking.
° Sugaryboiiovers that were not
removed promptly. See pg. [5.
2_OISTURE COLLECTS ON OVEN
WINDOW OR STEAM COMES
FROM OVEN VENT.
• This is normal when cooking foods highin
moisture.
° Excessivemoisture wasusedwhen dean-
ing the window.
]7HERE IS A STRONG ODOR OR
LIGHT SMOKE WHEN OVEN IS
TURNED ON.
• This is normal for a new range and wiil
disappear after a few uses. Initiating a
dean cyclewii[ "burn off" the odors more
quickly.
° Turning on a ventilation fan wiil help
remove the smoke and/or odor.
° Excessivefood soilson the oven bottom.
Use a self-clean cycle.
A FAN SOUND CAN BE HEARD
• This is the cooling fan and is normal The
fan wii[ continue to run after use until the
oven cools,
"]7 p* PLUS A NUMBER AND THE
MESSAGE: "CALL AN AUTHO-
RIZED SERVICER OR 800-688-
1100."
• This is called a fault code. If a fault code
appears in the displayand beeps sound,
press the Cancel pad. [f the fault code
and beeps continue, disconnect power to
the appliance.Wait a few minutes, then
reconnect power. If fauk code and beeps
still continue, disconnect power to the
applianceandcai[an authorized servicer.
° [f the oven is heavily soiled, excessive
flare-upsmayresuk in a fault code during
adeancycle. PressCancel pad and allow
the oven to coo[ completely, wipe out
excess soil then reset the dean cycle. If
the fault code and beeps still continue,
disconnect power to the appliance and
cai[ anauthorized servicer.
Loading ...
Loading ...
Loading ...