Loading ...
Loading ...
Loading ...
Surfaceburnercomponentsand Seepage55.
capsarenotassembledcorrectly
neburnersao no_ DUrR
and levek
ever .. *
Surface burners are dirty. Clears surface burner
components. (See page 54.)
Wrong orifice is assembbd. Check the burner orifice size and
very large or yellOW contact your ir]staller if you have
surface burner flames, the wrong orifice (LP gas instead
of natural gas or natural gas
instead of LP gas).
The overs door lock is turned ors. The display will show the Lock
icon. Hold the overs door open
Surface burners light and press the START/SET button
uur o/en burners ao no_ for 3 seconds.The overs will beep
ighL • and the Lock icon will turn off. ,
Gas Pressure ReguBtor shut off Call a qualified service technician.
switch is Jr]the'off position. •
Oven
iThe oven control beeps
and displays an error
i
i code.
You have a function error code.
Seethe"Information codes'chart
ors page 67.
Pressthe OFF/CLEAR button and
restart the overs. If the problem
persists, disconnect all power to
the range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
[ The oven burner air adjustment ' Call for a qualified service '
[Very !argo 0! yellow Oven shutters need to be adjusted. , technician.
Gas supply is not properly Seethe Installation Instructions
j connected or turned ors. that came with your range.
j©ven ternpeiature !StOO Over] thermostat needs See page 45.
j hot or cold. adjustment.
English - 62
Loading ...
Loading ...
Loading ...