Loading ...
Loading ...
Loading ...
To delay starting the self-cleaning cycle
_ 2 (_
4 5 6
_SeJa_@
Start _ 7 8 9 0
1, Repeat steps 1 and 2 or] the previous page.
2, Pressthe Delay Start button.The over] door locks.
3, Set the time you want the over] to start self-cleaning using the number pad.
4, Pressthe START/SET button.The over] will start self-cleaning at your specified time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.To turn
offthe self-cleaning cycle, press the OFF/CLEAR button.The cycle turns off] but the door remains
locked and the Lock icon blinks until the over] temperature falls below 392 °F (200 °C).
After self-cleaning
The door stays locked until the internal over] temperature falls below 392 °R
When the over] has cooled down, wipe the over] surfaces with a cloth to remove ash residue.
Stubborn stains car] be removed using a steel-wool pad. Lime deposits car] be removed using a
vinegar-soaking cloth.
If you are not satisfied with the cleaning results, repeat the cycle."HOT"appears or] the display
until the over] cools down. Wait until the message disappears, and start a new cycle.
A CAUTION Do not attempt to open the over] door immediately after the self-cleaning cycle
is complete.The over] is still very hot when the door unlocks. Escaping hot air and/or steam
could burr] you.
English - 57
Loading ...
Loading ...
Loading ...