Loading ...
Loading ...
Loading ...
Steam en
19
¡ If the water tank runs out of water while the appli-
ance is in operation, the appliance is paused and
the arrow of the water tank symbol flashes. Fill
the water tank with fresh water up to the "MAX"
mark and press to resume operation.
¡ You can use to change the steam setting at any
time when the appliance is in operation.
¡ After cooking with steam, wipe out the drip trough
and the cooking compartment.
→"After using steam operation", Page20
11.3 Steam combined operation
With some types of heating, you can switch on the
steam function. When you cook with added steam, the
appliance introduces steam into the cooking compart-
ment at various intervals and with varying degrees of
intensity. This gives you a better cooking result.
Your food
¡ becomes crispy on the outside.
¡ develops a glossy surface.
¡ is succulent and tender on the inside.
¡ only undergoes a minimal reduction in volume.
Steam combined operation can be used with the
following functions:
¡ Microwave
¡ Full-surface grill
¡ Centre-area grill
Setting the steam combined operation
Switch on microwave mode in addition to a type of
heating.
1.
Set the function selector to a combinable type of
heating.
a The display shows a default value for the temperat-
ure.
2.
Use the rotary selector to set the required setting
3.
Press until the required setting is selected on the
display.
a The water tank symbol appears on the display.
4.
Fill the water tank.
5.
Press to start.
a The cooking time counts down and the operation
starts.
a You can see the cooking time counting down.
a lights up.
a Once the cooking time has elapsed, the appliance
stops the operation and a signal sounds.
Notes
¡ If the water tank is empty, the appliance continues
to operate but without added steam. Nothing ap-
pears on the display.
¡ Opening the appliance door affects the cooking res-
ult. Always keep the appliance door closed when
cooking.
Changing the steam setting
▶
Press until the required setting appears on the
display.
Note:Repeatedly pressing this switches through the
settings, from the highest to the lowest setting. After
the lowest setting, the steam function is deactivated.
Press again to activate the steam function, starting at
the highest setting.
11.4 Pausing the operation
1.
Press or open the appliance door.
a The appliance stops the operation.
a flashes.
2.
Close the appliance door.
3.
Press .
a The appliance continues the operation.
a lights up.
11.5 Stopping operation
You can stop operation at any time.
▶
Turn the function selector to the off position.
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
11.6 Filling the water tank
The water tank is located to the right behind the tank
cover, below the appliance door. Before starting an op-
eration with steam, open the tank cover and fill the wa-
ter tank with water.
WARNING‒Risk of fire!
Due to the hot surfaces, vapours from flammable li-
quids may catch fire in the cooking compartment (ex-
plosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
▶ Do not pour flammable liquids (e.g. alcoholic drinks)
into the water tank.
▶ Only fill the water tank with water or with the descal-
ing solution we have recommended.
WARNING‒Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶ Wait until the water tank has cooled down from the
previous operation.
▶ Remove the water tank from the tank recess.
Requirement:The water hardness must be set cor-
rectly.
→"Setting the water hardness", Page13
1.
Press on the centre of the tank cover.
a The tank cover opens.
Loading ...
Loading ...
Loading ...