Loading ...
Loading ...
Loading ...
SETTINGS ➤ Operating a TV via the TV Remote Repeater function of the unit En 58
When the TV Remote Repeater function is enabled, the unit receives TV remote control signals at the remote control sensor (on front) and
transmits the signals from the TV Remote Repeater (on rear). This function is useful when you cannot operate your TV from the remote control
because the remote control sensor of the TV is blocked by the unit.
• This function can be used while the TV remote control is using infrared signals.
• Position the unit and TV so that they are separated by at least 5 cm (2").
Follow the steps below to enable the TV Remote Repeater function.
1
Press the SETUP key.
The setup menu is displayed.
2
Use S/T key to select “Function”, and then press
the ENTER key.
3
Use S/T key to select “TV Remote Repeater”, and
then press the ENTER key.
4
Use S/T key to select “On”, and then press the
ENTER key.
5
Press the SETUP key to exit the setup menu.
Operating a TV via the TV Remote Repeater function of the unit
HDMI
IN OUT(ARC)
NETWORK
TV
ANALOG
SUBWOOFER OUT
UPDATE ONLY
TV remote control sensor
TV remote control
TV Remote Repeater
SETUP
/
ENTER
Loading ...
Loading ...
Loading ...