XE395 OWNER’S MANUAL

Loading ...

Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur when a

elliptical is rst turned on or even during use. If your elliptical is tripping the house circuit breaker (even though it is the

proper current rating) but the circuit breaker on the elliptical itself does not trip, you will need to replace the home breaker

with a high inrush type. This is not a warranty defect. This is a condition we as a manufacture have no ability to control. This

part is available through most electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.

com part #QO120HM. The electrical outlet used should have a dedicated 15 amp circuit breaker.

Grounding Instructions

This product must be grounded. If the your equipment should malfunction or breakdown, grounding provides a path

of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an

equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualied electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug

provided with the product if it will not t the outlet; have a proper outlet installed by a qualied electrician.

This product is for use on a nominal 110-volt/15 amp dedicated circuit, and has a grounding plug that looks like the plug

illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a

2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used

only until a properly grounded outlet, (shown below) can

be installed by a qualied electrician. The green colored

rigid ear-lug, or the like, extending from the adapter, must

be connected to a permanent ground such as a properly

grounded outlet box cover. Whenever the adapter is used, it

must be held in place by a metal screw.

Loading ...

OWNER’S MANUAL - Page 7