Loading ...
Loading ...
Loading ...
16
XE395 STEP FOUR
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
115 PHILLIPS HEAD SCREW
M5 X12MM
12
119 SHEET METAL SCREW
3.5 X 12MM
8
122 PHILLIPS HEAD SCREW
M6 X 10MM
4
1. Gather HARDWARE FOR STEP 4.
2. Fasten the 2 WHEEL COVERS (79 & 80) above
the rollers with 4 PHILLIPS HEAD SCREWS
(115). Tighten with the PHILLIPS HEAD SCREW
DRIVER (157).
3. Plug the power cord into the machine and a
grounded wall outlet. Turn the power switch on.
Press the start button and elevate the incline to level
8. Attach the COVER (85) to the mid-stabilizer tube
with 2 PHILLIPS HEAD SCREWS (115). Tighten
the screws with the PHILLIPS HEAD SCREW
DRIVER (157).
4. Install the LEFT HANDLE BAR COVERS (81
& 82) and RIGHT HANDLE BAR COVERS
(83 & 84) over the Handle Bars axle connections
with 4 SHEET METAL SCREWS (119) on each
side. Tighten with the PHILLIPS HEAD SCREW
DRIVER (157).
Continued on next page...
Loading ...
Loading ...
Loading ...