Loading ...
Loading ...
Loading ...
17
5. Attach a STEEL BRACKET (180) to the Rear Stabilizer Tube on the
left and right sides (with the single hole facing the rear), and secure
them with 4 PHILLIPS HEAD SCREWS (122). Tighten using the
PHILLIPS HEAD SCREW DRIVER (157).
6. Attach the front REAR STABILIZER COVER (87) to the REAR
STABILIZER TUBE (2) with 2 PHILLIPS HEAD SCREWS (115).
Secure with the PHILLIPS HEAD SCREW DRIVER (157). Attach
the back REAR STABILIZER COVER (88) onto the Rear Stabilizer
Tube with 4 PHILLIPS HEAD SCREWS (115). Secure using the
PHILLIPS HEAD SCREW DRIVER (157).
7. Look closely at the four oor levelers underneath the middle and
rear of the elliptical. If any of these aren’t in contact with the oor, use
the WRENCH (109) to loosen the top nut. Once the nut has been
loosened, turn the rubber caster clockwise until it makes solid contact
with the oor. Retighten the top nut to prevent it from moving.
8. Return the elevation to the at position using the Incline down key.
Loading ...
Loading ...
Loading ...