Loading ...
Loading ...
Loading ...
17
Rear Panel (European, Australian and Asian models)
K L M
N
P
Q
R
S
T
O
K SIGNAL GND terminal: Connect the ground
wire of the turntable.
L AUDIO IN jacks: Input AV component audio
signals with an analog audio cable.
M IR IN/OUT port: Connect a remote control
receiver unit. ( →p75)
N RS-232C port: Connect a home control system
equipped with an RS-232C port. For installing
a home control system, contact the specialized
stores.
O 12V TRIGGER OUT A/B jack: Connect a device
equipped with a 12V trigger input jack to enable
power link operation between the device and this
unit. ( →p76)
P PREOUT jacks: Connect a power amplier.
( →p60)
Q SUBWOOFER PRE OUT jacks: Connect a
powered subwoofer with a subwoofer cable. Up
to two powered subwoofers can be connected.
The same signal is output from each of the
SUBWOOFER PRE OUT jacks.
R ZONE 3 PRE/LINE OUT jacks: Output audio
signals with an analog audio cable connected
to an integrated amplier in a separate room
(ZONE 3).
HEIGHT 2 PRE OUT jacks: Connect a power
amplier. ( →p60)
S ZONE 2 PRE/LINE OUT jacks: Output audio
signals with an analog audio cable connected
to an integrated amplier in a separate room
(ZONE 2).
ZONE B LINE OUT jacks: Simultaneously
output the same audio source as the speakers
(ZONE A) connected to this unit by connecting
this unit to wireless headphones, wireless
speaker transmitter, etc., using an analog audio
cable.
T SPEAKERS terminals: Connect speakers
with speaker cables. (Y plug connection is not
supported.)
Loading ...
Loading ...
Loading ...