Loading ...
Loading ...
Loading ...
108
Playback
Playing Back (ZONE 2)
In the remote controller operation, while pressing and holding the ZONE 2
SHIFT button on the remote controller, operate with each button.
1. Point the remote controller at the unit, and while pressing and holding the
ZONE 2 SHIFT button on the remote controller, press .
• "Z2" on the display of the main unit lights up.
2. While pressing and holding the ZONE 2 SHIFT button on the remote
controller, press the input selector of the input source you want to play in the
separate room. When operating on the main unit, press the ZONE CONTROL
button repeatedly to select "Z2" on the display, then within 8 seconds select
the input you want to play in another room using the input selector dial.
3. When using the ZONE 2 PRE/LINE OUT connection, adjust the sound
volume on the integrated amplier in the separate room. For the ZONE
speaker output, while pressing and holding the ZONE 2 SHIFT button on the
remote controller, adjust the volume with the volume button. When operating
on the main unit, press the ZONE CONTROL button repeatedly to select "Z2"
on the display, then within 8 seconds adjust using the MASTER VOLUME
knob.
• When connecting an integrated amplier that does not have a volume
control, in the System Setup menu, set "Multi Zone" - "Zone 2" - "Output
Level" ( →p148) to "Variable (Default Value: Fixed)". If you do not set
this, the volume output will be very loud and there is a danger of damage
to the integrated amplier, speakers, etc. When connecting an integrated
amplier that has a volume control, leave this as "Fixed".
• Information of a connected device can be displayed on the TV in the
separate room. Press the button while pressing and holding the ZONE 2
SHIFT button on the remote controller.
• If you turn the unit to standby during multi-zone playback, the Z2 indicator is
dimmed, and the playback mode is switched to playback in a separate room
only. Setting ZONE 2 to on while the unit is in standby also switches the
playback mode to playback in the separate room only.
• The audio from externally connected AV components can be output to ZONE
2 only when the audio is analog or 2 ch PCM signal. When the AV component
1
2
Loading ...
Loading ...
Loading ...