Loading ...
Loading ...
Loading ...
143
Setup
Hardware
Audio TV Out (Default Value: Auto)
You can enjoy audio through the speakers of the TV while this unit is on.
• This setting is xed to "Auto" if you have set "Input/Output Assign" - "TV Out/
OSD" - "HDMI Out" or "HDMI" - "HDMI Out" in "AV Adjust" to "MAIN" or
"MAIN+SUB" and "HDMI CEC" is set to "On". If you change this setting, set
"HDMI CEC" to "Off".
• Listening mode cannot be changed while "Audio TV Out" is set to "On" and
audio is being output from the TV.
• Depending on your TV or input signal of the connected device, audio may not
be output from the TV even if this is set to "On". In such a case, audio is output
from the speakers of the unit.
• Audio is output from this unit if you operate the MASTER VOLUME dial on this
unit when audio that is input to this unit is output from your TV speakers. If you
do not want to output audio, change the setting of this unit or TV, or reduce the
volume of this unit.
On When this function is used
Off When this function is not used
Auto When the "HDMI Out" setting is "MAIN" or "MAIN+SUB" and
the "HDMI CEC" setting is "On", the setting is xed to "Auto".
With "Auto", when audio is output from the TV speakers, audio
is not output from the speakers of this unit, and when audio is
output from the speakers of this unit, audio is not output from
the TV speakers.
• If the HDMI CEC setting is off on the TV, there may be audio
output from both the TV speakers and the speakers of this
unit.
Audio Return Channel (eARC supported) (Default Value: On)
You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARC-
compatible TV through the speakers connected to the unit.
On When enjoying the TV sound through the speakers connected
to the unit
Off When the ARC function or eARC function is not used
Auto Delay (Default Value: On)
Automatically corrects desynchronization between the video and audio signals
based on the information from the HDMI Lip-Sync-compatible TV.
On When enabling the automatic correction function
Off When not using the automatic correction function
Loading ...
Loading ...
Loading ...