Loading ...
Loading ...
Loading ...
21
4. Clean the exterior housing with a damp cloth. A plastic scouring pad may be used, gently
rub surface to avoid scratching.
5. Remove any our, bread crumbs or other food from the inside of the baking chamber,
using a damp sponge, cloth or a small portable vacuum cleaner. A plastic scouring pad
may be used; gently rub to avoid scratching.
6. Rinse with a damp cloth and dry thoroughly.
7. To clean the bread pan and kneading paddle, allow to cool completely before cleaning.
If the kneading paddle is baked onto the drive shaft, simply ll the bread pan with soapy
water. Holding the paddle in one hand, turn the crank at the bottom of the bread pan and
try to loosen. If necessary, soak pan for up to 30 minutes.
CAUTION: Do not soak for longer than 30 minutes to avoid damage to the
non-stick surface.
8. Wash bread pan and kneading paddle with a nylon bristle brush. Do not use steel wool,
abrasive cleaners, or metal utensils on the bread pan or kneading paddle as they will
damage the non-stick surface. Normal wear is to be expected. The non-stick may discolor
over time but in no way will this impair performance.
NOTE: The bread pan and kneading paddle may be washed in the top rack of any
dishwasher.
Storing Instructions
1. Make sure bread maker is unplugged and cooled before storing.
2. Clean the bread pan and kneading paddle following the procedures outlined in the
“Care & Cleaning” section of this instruction manual.
3. Wrap the bread pan/paddle hook in paper towel. Assemble the kneading paddle onto the
bread pan, add the wrapped hook inside. Store the bread maker with the bread pan locked
in position and the lid closed.
4. Store the bread maker in its box or in a clean, dry place. Never store it while it is hot or still
plugged in.
5. Cord may be loosely wrapped around the bread maker. Never wrap cord tightly around the
appliance. Do not put any stress on the cord where it enters the unit, as it could cause the
cord to fray and break.
Loading ...
Loading ...
Loading ...