Loading ...
Loading ...
Loading ...
9
Fitness Bike
CR800
1. Install the front and rear stabilizer covers (32 & 37) and secure to the frame with four screws (99).
2. Install the left and right cup holders (39 & 38) to the rear handlebars with four self tapping screws (105).
3. Install the bottom seat cushion (61) to the seat carriage (4) with four screws (98).
4. Install the Pedals (116 L, 117 R) into the Crank arms (51 L, 51 R). Remember that the left pedal has a reverse
thread and will be screwed into the crank in the opposite rotation from normal threads. There is an “L” stamped
into the end of the threaded post of the left pedal and an “R” in the right. Make sure to tighten the pedals as
much as you possibly can. It may be necessary to re-tighten the pedals if you feel a thumping during pedaling the
bike. A clicking noise, or thumping, sound during pedaling is usually caused by the pedals being too loose.
5. Connect the two wire harnesses (44 & 45) to the corresponding connectors on the back of the console. Install
the console onto the console mast and secure with four screws (99) being careful to not pinch the wires.
HARDWARE
STEP 4: Console, Seat, Covers & Pedals
#105. 4mm x 16mm
Self Tapping Screw
(4 pcs)
#99. M5 x 12mm
Phillips Head Screw
(8 pcs)
#98. M6 x 15mm
Phillips Head Screw
(4 pcs)
Loading ...
Loading ...
Loading ...