Loading ...
Loading ...
Loading ...
6
Fitness Bike
CR800
1. Install the Rear Stabilizer (7) onto the Main Frame with four bolts (65) and four washers (84).
2. Install the handlebar assembly (6) onto the seat carriage (4) with four bolts (71) installed through the top holes
and secured with four at washers (77) and nylon nuts (89). Install two bolts (175) through the side holes and
secure with two at washers (77) and nylon nuts (89).
3. Plug the Left hand pulse wire (27) into the corresponding left socket (42) located in the left plastic side case
under the seat carriage, and the Right hand pulse wire (21) into the right socket (26).
HARDWARE
STEP 1: Rear Stabilizer & Handle Bars
#77.3/8” x 19
Flat Washer (6 pcs)
#84.3/8” x 1”
Flat Washer
(4 pcs)
#71.3/8” x 2”
Hex Head Bolt
(4 pcs)
#89.3/8”
Nylon Nut
(6 pcs)
#65.3/8” x 2-1/4”
Hex Head Bolt
(4 pcs)
#175.3/8” x 2-3/4”
Hex Head Bolt
(2 pcs)
Loading ...
Loading ...
Loading ...