Loading ...
Loading ...
Loading ...
8
Fitness Bike
CR800
1. Install the console mast cover (31) onto the console mast (2), making sure it is facing the correct direction as in
the picture below. Run the two wire harnesses through the bottom of the console mast tube and out the top
opening.
2. Slide the console mast into the receiving tube (1) being careful to not pinch the wires. Fasten the console mast
with six bolts (68) and four at washers (76) on the side bolts and two curved washers (83) on the front
bolts. Snap the console mast cover in place.
3. Install the front handlebars (3) onto the console mast with two bolts (68), split washers (82) and at washers
(76).
HARDWARE
STEP 3: Console Mast & Handlebars
#68. 5/16” x 5/8”
Hex Head Bolt
(8 pcs)
#83. 5/16” x 3/4”
Curved Washer
(2 pcs)
#76. 5/16” x 11/16”
Flat Washer
(6 pcs)
#82. 5/16”
Split Washer
(2 Pcs)
Loading ...
Loading ...
Loading ...