Loading ...
Loading ...
Loading ...
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service,
Possible Causes
Dryer is unplu_
Fuzz is blown/circuit breaker is
tripped
Fu_ is blown/circait breaker is
tripped, the dryer may tmnbie but not
l_eat
Gas _zrvice is off
Some shaking/noise is normal. Dryer
may be sitting unevenly
Improper _se of fabric _)fiener
Drying dirty items with clean on_
Clothes were not completely clean
Lint filter is full
Improper _)rting
Static electricity can attract lint
Overloading
Paper, tissue, etc. left in pockets
No fabric softener was a_d
Overdrying
Synthetics_ permanent prt_s_ and
blends can c.aa_ static
Type of heat
What To Do
• Make sure _he dryer plug is pushed completely Jmo the
outlet.
• Check the house fuse/circuit breaker box and replace
fuse or reset brenner; NOTE: Most electric &yers use
two Nseffbmakcrs.
• Check the house fuse/circuit breaker box and _place
fuse or rc_t brcakcr.
• Make sure gas shutoff at dryer and main shutoff arc
fully OF_m
• Move @er m an even floor space, or adjust leveling
legs as necessary until even,
• Follow directions on fabric sofmner package.
• Dirty items can stNn clem_ items and the dryer,
• Sometimes stains which cannot be seen when the
clothes are wet appear after drying. Use proper
washing pr_:edurcs bel;_re drying.
• Clean lint screen tx:fore each load.
• Sort lint producers (like chenille) from lint collectors
(like corduroy).
• See suggestions in _his section under STATIC.
• Separate large loads into smaller ones.
• Empty N1pockets beti)re laundering clothes_
• Try a :Nbric sotiene:r,
• Fry a Nbric softener.
• A{[iust controls lbr less drying.
• Try a fabric sotiener,
• Automatic drying times will v_) according to [he ty[x_
of heat used (electric, _mtural, or LP gas), sJzc of ioad,
types of fabrics, wetness of clothes and condition of
exhaust ducts_
Loading ...
Loading ...
Loading ...