Loading ...
Loading ...
Loading ...
Manual Preset Cycle Settings
Manual Dry Default Time*
Cycles L_d
SPEED DRY Tu 25
SMALL LOADS
FRESHEN UP Medium 20
Remove Wdnkles
AIR DRY Air Dry 3,3
Use Modifiers to select temperatures for the Manual
Cycles. Press TEMP. CONTROL until the desired
temperature setting glows. Temperature modifiers
cannot be used with the Sensor Dry Cycles.
@HIGH
MEDIUM
@HIGH
@MEDIUM
o LOW
@ULTRA
LOW
TEMR
_t'TROL
You can customize your cycles by selecting options.
Vw_IN_
BEEP CARE
When using Air Dry
This chart shows examples of items that can be dried using
AIR DRY.
Damp Dry Beep
Select DAMP DRY BEEP to alert you that your
clothes are approximately 80% dry. This is useful
when you want to remove lightweight items in a
mixed load to prevent overdrying or remove
partially dry items that may need ironing.
NOTE: The Damp Dry Beep is only available with
the Sensor Dry Cycles.
WRINKLE CARE
WRINKLE CARE prevents wrinkles that form when
you cannot unload the dryer promptly at the end of
a cycle. During this option, the dryer will periodically
tumble.
[] Press WRINKLE CARE to get up to 3 hours of
heat-free, periodic tumbling at the end of a cycle.
[] Stop WRlNKLE CARE at any time by pressing
WRlNKLE CARE or opening the dryer door.
NOTE: If you do not select WRINKLE CARE, the
dryer stops after cool down.
Ty_ of Load Default Time*
Foam rubber-pillows, padded bras, 20 - 30
stuffed toys
Plastic-Shower curtains,
tabl_lothes 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
Reset cycle to complete drying, if needed.
[] Check to see that coverings are securely stitched.
[] Shake and fluff pillows by hand periodically during the
cycle.
[] Dry item completely. Foam rubber pillows are slow to
dry.
NOTE: Air Dry is not avaiiable with Sensor Dry Cycles
Loading ...
Loading ...
Loading ...