Loading ...
Loading ...
Loading ...
TEC_TM_156 | REV. G | EN 10/23/2023 Page 87 of 10015 & 24 INCH INSTALL GUIDE
GENERAL MAINTENANCE, CARE & CLEANING
DRAWER REMOVAL, INSTALLATION & ADJUSTMENT (CONT.)
ADJUSTMENT
1. Open the drawer.
2. With the adjustment bracket screws loosened, lift
the drawer slide and the side of the drawer. Then,
lower or raise the adjustment screw. See fig. 5.
NOTE: DO NOT LIFT THE DRAWER BY THE
HANDLE.
3. Close the drawer and verify the alignment.
4. Repeat steps 1-3 as needed.
5. Tighten the alignment bracket screws.
NOTE: DO NOT LIFT THE DRAWER BY THE
HANDLE.
FIG. 5.
Drawer adjustment screw location. Left side shown.
Drawer removed for illustration purposes.
FIG. 4.
Adjustment bracket orientation. Left side shown.
Loading ...
Loading ...
Loading ...