Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. G | EN10/23/2023Page 46 of 100
INSTALLATION
ANTI-TIP BRACKET INSTALLATION
(CONT.)
1. With the appropriate provided hardware, install
the anti-tip brackets. See fig. 2.
NOTE: THE CONCRETE SCREWS ARE BLUE.
2. Carefully position the unit in its final installation
location. Be sure the rear leveling legs slide into
the anti-tip brackets. See fig. 3.
NOTE: DO NOT LIFT THE APPLIANCE BY
THE COUNTERTOPS, DOORS, DRAWERS,
OR GRILLS.
LEVELING
Proper leveling of your TRUE unit is critical to
operating success. Leveling impacts effective
condensate removal and door operation.
With the appliance in the final installation location,
level the unit front-to-back and side-to-side.
PROCEDURE
1. Position the level on the inside floor of the unit
near the doors (the level should be parallel to
appliance front). Level the appliance.
2. Position the level at the inside rear of the appliance
(again, the level should be placed parallel to
cabinet back). Level the appliance.
3. Perform procedures similar to steps 1 and 2 by
placing the level on the inside floor (left and right
side, parallel to the depth of the cooler). Level the
appliance.
Loading ...
Loading ...
Loading ...