Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. G | EN10/23/2023Page 44 of 100
INSTALLATION
packing material
REQUIRED TOOLS
• Cutting utensil (utility knife)
• Hammer
• Crowbar
• Phillips head screwdriver
• Floor Protector
PROCEDURE
The following procedure is recommended for uncrating
the unit:
1. Remove the outer packaging (cardboard and clear
plastic). See fig. 1.
2. Inspect the unit for concealed damage.
Immediately file a claim with the freight carrier if
there is damage.
3. Cut the plastic band and remove the foam block.
See fig. 2.
NOTE: MOVE THE UNIT AS CLOSE AS
POSSIBLE TO ITS FINAL LOCATION BEFORE
REMOVING THE SKID.
4. Position the floor protector next to the skid.
5. Carefully lift the unit off the skid and place the unit
on the floor protector. See fig. 3.
6. Remove the interior packaging. See fig. 4.
UNCRATING
FIG. 1.
Pull the staples from the skid.
FIG. 2.
Remove the foam block after moving the unit as close as
possible to the final installation location.
FIG. 3.
Carefully move the unit off the skid.
FIG. 4.
Interior packaging locations.
NOTE: KEYS FOR THIS UNIT ARE LOCATED
INSIDE THIS PACKET. THE ANTI-TIP
BRACKET KIT AND DOOR STOP ARE
LOCATED INSIDE THE UNIT.
Loading ...
Loading ...
Loading ...