Loading ...
Loading ...
Loading ...
TEC_TM_156 | REV. G | EN 10/23/2023 Page 59 of 10015 & 24 INCH INSTALL GUIDE
APPLIANCE SETUP
PROCEDURE (CONT.)
4. Align the unit with the drilled hole. See fig. 4.
5. Install the provided coupling and PVC tubing in
the draft standard holes. See fig. 5.
NOTE: DO NOT USE PVC GLUE.
6. Cut the coupling and PVC tubing flush with the
countertop.
7. Apply food grade silicone to any gaps between
the PVC tubing and the countertop.
NOTE: CLEAN EXCESS SILICONE.
8. Proceed to “Draft Standard Installation & Hook
Up.” Be sure to use draft standard mounting
screws appropriate forcountertop material and
thickness.
FIG. 4.
Align the holes in the appliance with the drilled hole.
FIG. 5.
Cut the coupling (A) and the PVC tubing (B) flush with the
countertop.
DRIP TRAY INSTALLATION
Assemble the drip tray and place it beneath the draft tower spout(s).
A B
(19.8 mm)
(203.2 mm)
(304.8 mm)
DRAFT STANDARD INSTALL (COUNTERTOP)
Loading ...
Loading ...
Loading ...