Loading ...
Loading ...
Loading ...
French – 69
3 Fermer le bouclier arrière pour laisser la machine
décharger le matériau à la gauche de la machine lors
de la coupe.
Hauteur de coupe
La hauteur de coupe peut être réglée sur neuf positions
différentes (entre 1 et 9).
Soulever les roues pour une hauteur de coupe basse et
abaisser les roues pour une hauteur de coupe élevée.
Régler la hauteur de coupe en fonction des besoins. La
position moyenne est la meilleure pour la plupart des
pelouses.
• Pour modifier la hauteur de coupe, appuyer le levier
de réglage de hauteur vers la roue. Déplacer la roue
vers le haut ou vers le bas selon les besoins. Définir
la même hauteur aux quatre coins.
• Le levier de réglage est à ressort.
Remplissage d’huile
• Le réservoir d’huile est vide à la livraison. Remplir
doucement le réservoir d’huile avec l’huile incluse.
Consulter les instructions sous la rubrique Entretien.
MONTAGE ET RÉGLAGES
20 – English
General
WARNING! The user must only carry out the maintenance and service work described in this
manual. More extensive work must be carried out by an authorized service workshop.
Switch off the engine before carrying out any checks or maintenance. Stop the engine (motor) and
wait until the blade comes to a complete stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge chute. Prevent unintentional starting by removing the
ignition cable from the spark plug. The starter key or battery must also be removed on machines
with electric start.
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest servicing dealer.
• Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.
• Replace any damaged, worn or broken parts.
• Always use genuine accessories.
Maintenance schedule
In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on average use of the machine, and may differ
depending on the rate of your personal use.
Daily Maintenance
Before
use
After
each use
Every
10 hours
Every
25 hours
Every
100 hours
Before
storage
Lawn mower
Tighten bolts and nuts. X X
Clean / Inspect Grass Catcher * X X X
Check tires X
Check drivewheels*** X
Clean the machine**** X X
Clean under the drive cover*** X
Check the drive belt / Pulleys*** X
Check that the cutter is undamaged and
not cracked. Replace the cutter if
necessary.
X
3
General lubrication X
Clean and Recharge Battery ** X X
4
Engine
Check the engine’s oil level X
5
Change engine oil X
1,2
Clean the air filter. Replace if necessary. X
2
Check that the muffler is securely attached
and not damaged.
X
Replace the spark plug. X
Empty fuel tank or add Stabilizer X
* If so equipped
** Machines equipped with electric start
*** Power-Propelled machines
**** Use a scraper to clean under deck
Note 1: When operating with a heavy load or at high ambient temperatures, or other extreme conditions, service the
machine more often. Note 2: Clean more often if conditions are exceptionally dusty. Note 3: Replace blades more often
when mowing in sandy soil. Note 4: Charge the battery for max. 48 hours. Note 5: And after 5 hours of use.
MAINTENANCE
Loading ...
Loading ...
Loading ...