Loading ...
Loading ...
Loading ...
Before Setting Surface Controls
Check burner cap placement before operating
the surface burners
To prevent flare-ups and avoid creation of
harmful by-products, do not use the cooktop without all burner
caps properly installed to insure proper ignition and gas flame
size.
It is very important to be sure that all surface burner caps and
burner grates are properly installed and in the correct locations
before operating the cooktop burners.
Important notes:
• Always keep surface burner caps in place whenever using a
surface burner.
• When placing the burner caps, be sure that all burner caps
are seated firmly and rest level on top of burner heads.
• For proper flow of gas and ignition of burners do not allow
spills, food, cleaning agents or any other material to enter
the gas orifice port opening.
• Burner heads are fixed. Do not try to remove them.
On round style burners, the burner cap lip (Figure 3) should fit
snug into the center of burner head and rest level.
Burner cap
I
I
Burner cap lip
I
Figure 3: Burner cap lip placement
Refer to Figure 4 for correct and incorrect burner cap place-
ment.
Correct burner cap
placement
Incorrect burner cap
placement
Figure 4: Correct & Incorrect Burner cap placement
Once in place, you may check the fit by gently sliding the
burner cap from side to side to be sure it is centered and firmly
seated (Figure 5). When the burner cap lip makes contact inside
the center of the burner head you will be able to hear the burner
cap click. Please note that the burner cap should NOT move off
the center of the burner head when sliding from side to side.
Check and be sure that all oval style (some models) burner caps
are correctly in place on oval burner heads.
iiii
Figure 5: Checking the fit
Dual Burner cap placement
To prevent flare-ups and avoid creation of
harmful by-products, do not use the cooktop without all burner
caps properly installed to insure proper ignition and gas flame
size.
Dual burner head (same models)
Burner cap
-_ cap lip
Burner
Burner head
:essed areas
Burner
,'- I head
Burner caps
Figure 6: Dual burner cap placement
Loading ...
Loading ...
Loading ...