Loading ...
Loading ...
Loading ...
Before You Call
Solutions to Common Problems
Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the
problem listed:
Problem
Poor baking results
Appliance is not level.
Cannot move appliance easily.
Appliance must be accessible for
service.
Entire appliance does not operate. •
Oven portion of appliance does not •
operate. •
Oven light does not work.
Fan noise during cooking operation •
Solution
Many factors affect baking results. Make sure the proper oven rack position is used.
Center food in the oven and space pans to allow air to circulate. Allow the oven to
preheat to the set temperature before placing food in the oven. Try adjusting the recipe's
recommended temperature or baking time. If you feel the oven is too hot or cool, see
"Adjusting Oven Temperatures (UPO)" on page 32. In addition, be sure to make adjust-
ments for cookware types.
Be sure floor is level, strong, and stable enough to adequately support range.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust
leveling legs at base of appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
Cabinets not square or are built in too tightly. Contact builder or installer to make
appliance accessible.
Carpet interferes with appliance. Provide sufficient space so appliance can be lifted over
carpet.
Gas line is hard-plumbed. Have a flexible CSA International approved metal appliance
connector installed.
Make sure power cord is plugged properly into outlet.
Electrical power outage. Check house lights to be sure. Call your local electric company
for service outage information. In addition, service wiring is not complete. Call 1-800-4-
MY-HOME® for assistance (See back cover).
House fuse has blown or circuit breaker has tripped immediately following installation.
House fuse may not be full engaged. Check fuse and screw or engage circuit breaker
securely.
House fuse has blown or circuit breaker has tripped after the oven has been installed and
previously operating. Call your local electric company for service outage information.
Call 1-800-4-MY-HOMEO for assistance (See back cover).
Be sure regulator gas valve is turned to ON. See installation instructions.
The time of day is not set. The time of day must first be set in order to operate the oven.
See .... on page 16.
Be sure the oven controls are set properly for the desired function. See the "Oven
Controls" chapter starting on page 14 and review instructions for the desired cooking
function in this manual or see "Entire appliance does not operate" in this checklist.
Be sure the oven light is secure in the socket. Also see "Replacing the Round Halogen
Oven Light" on page 39.
A cooling fan may automatically turn on and off to cool internal parts. This is normal,
and the fan may continue to run even after oven in turned off.
42
Loading ...
Loading ...
Loading ...