Kenmore 79075422412 Elite gas range

User Manual - Page 16

For 79075422412.

PDF File Manual, 46 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Oven Controls
Figure 18:12 Hr dAy (L) and 24 Hr dAy (R) settings
Reset the correct time as described in "Setting The Clock" on
page 15. Note that if the 24 hour time of day mode was chosen,
the clock would now display a time from 0:00 through 23:59.
Figure 21: Set timer display indicating an End function
To cancel the timer when active, press Timer ON/OFF
again.
Setting Timer
The timer serves as an extra timer in the kitchen that will beep
when the set time has run out. It does not start or stop cooking.
This feature can be used during any of the other oven control
functions, except during a Self Clean. Refer to Table 2 on
page 15 for time amount settings. The timer may be set from a
minimum time of 1 minute to a maximum of 11 hours and 59
minutes.
Important note:
When the timer is set for more than 1 hour, it will display
hours and minutes until 1 hour remains. When less than 1
hour remains, the display counts down in minutes and
seconds. With less than 1 minute remaining, only seconds
will display.
If the timer is active during a cooking process, the timer will
show in the display.
To set timer for 5 minutes:
1. Press Timer ON/OFF (Figure 19).
Figure 19: Set timer display
2. Enter 5 using numeric key. Press START and the time will
begin to count down in the display (Figure 20).
Figure 20: Timer display for 5 minutes
Important note: If START is not pressed, the timer will return to
the time of day after 30 seconds.
3. When set time ends, END and TIMER will show in the
display, and the control will sound with three beeps every 7
second until Timer ON/OFF is pressed (Figure 21).
Add 1 Minute
Use Add 1 Minute to set additional minutes to the timer. Each
press of the key will add 1 minute. If Add 1 Minute is pressed
when the timer is not active, the timer will activate and begin
counting down from 1 minute.
To add 2 minutes to the timer:
Press Add 1 Minute twice.
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 12 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 12 Hour Energy Saving
feature:
1. Press and hold Timer ON/OFF for 6 seconds (Figure 22).
Figure 22: Indication for Timer ON/OFF
2. After 6 seconds, 12 Hr OFF or StAY On will appear in the
display, and the control will beep once (Figure 23). 12 Hr
Off indicates the control is set for the 12 Hour Energy
Saving mode, and Stay On indicates the control is set for
Continuous Bake feature.
Figure 23:12 hr energy saving (L) and continuous setting (R)
3. Press Self Clean to toggle between 12 Hour OFF or Stay On
feature (Figure 23).
16
Loading ...
Loading ...
Loading ...