Loading ...
Loading ...
Loading ...
242
The Setup Menus
8
CONNECTION MODE
Adjust settings for connection to external devices.
OptionOption
DescriptionDescription
USB CARD READER
Connecting the camera to a computer via USB automatically
enables data transfer mode, allowing data to be copied to
the computer. The camera functions normally when not con-
nected.
X WEBCAM
The camera can be used as a webcam when connected to a
computer running FUJIFILM X Webcam.
USB MOVIE
SHOOTING AUTO
*
The camera’s movie-recording features can be controlled
from gimbals, drones, or other devices connected via USB.
The camera automatically enters “tethered shooting” (i.e., re-
mote-control) mode when the external device is turned on
and returns to normal operation when the external device
turned off or disconnected. The features available vary with
the type of device connected.
USB MOVIE
SHOOTING FIXED
*
As for USB MOVIE SHOOTING AUTO, except that the
camera remains in “tethered shooting” (remote-control)
mode when the external device is off or not connected, al-
lowing the device to resume control when the connection
is re-established after an accidental disconnection or other
disruption.
USB RAW CONV./
BACKUP RESTORE
Connecting the camera to a computer via USB automatical-
ly enables USB RAW conversion/backup restore mode. The
camera functions normally when not connected.
•
USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the cam-
era’s image processing engine to rapidly convert RAW fi les
to high-quality JPEG images.
•
BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load
camera settings. Reconfi gure the camera in an instant or
share settings with other cameras of the same type.
* Rotate the drive dial to F (movie).
N
For information on compatible computer software, see “Software for
Use with Your Camera” (P 298).
Loading ...
Loading ...
Loading ...