Loading ...
Loading ...
Loading ...
67
Wireless Radio Displays whether wireless function is enabled on the radio band.
Channel Frequency Displays the channel and frequency which are currently used by the
EAP.
Channel Width Displays the channel width which is currently used by the EAP.
IEEE802.11 Mode Displays the IEEE802.11 protocol currently used by the EAP.
Max TX Rate Displays the maximum physical rate of the EAP.
Tx Power Displays the transmit power of the EAP.
Monitor Radio Traffic
You can monitor the radio traffic of the EAP. The following figure posted in the introduction
takes 2.4GHz of a dual-band device as an example.
The following traffic information of the radio will be displayed:
Rx Packets Displays the total number of the received packets on the current band
since the EAP starts up.
Tx Packets Displays the total number of the sent packets on the current band since the
EAP starts up.
Rx Bytes Displays the total received traffic on the current band since the EAP starts
up.
Tx Bytes Displays the total sent traffic on the current band since the EAP starts up.
Rx Dropped
Packets
Displays the total number of the dropped packets which are received on
the current band since the EAP starts up.
Tx Dropped
Packets
Displays the total number of the dropped packets which are sent on the
current band since the EAP starts up.
Rx Errors Displays the total number of error packets which are received on the
current band since the EAP starts up.
Loading ...
Loading ...
Loading ...