Loading ...
Loading ...
Loading ...
7
Tips:
If you want to power your EAPs using a PoE switch, refer to the following topology.
Router
EAP Bridge AP (Main AP) Bridge AP (Sub-A
P)
Wireless Bridge
EAP
Management Clients
PoE Switch
1.2.2 Connect GPON APs
GPON AP
GPON AP
T
elephone
Gateway
Switch
OLTOptical Splitter
SIP
Server
Clients
Note:
• Before you start, be sure to power up and connect your devices according to the above topology.
• A DHCP server (typically a gateway/router with the DHCP function enabled) is required to assign
IP addresses to the EAPs and clients in your local network.
1. Connect your gateway to the internet.
2. Connect the EAPs to the OLT via optical splitters.
Loading ...
Loading ...
Loading ...