Loading ...
Loading ...
Loading ...
13
Go to https://www.tp-link.com/download/EAP-Controller.html#EAP_Discovery_Tool to
download, install and launch EAP Discovery Utility on your PC. EAP Discovery Utility can
scan all EAPs in the same network segment, and find the IP address of the EAP. In the
following figure, for example, the IP address of the EAP is 192.168.0.5.
Note:
Some EAP models only works with certain software version of Discovery Utility. If your Discovery
Utility can’t discover your EAP anyway, try a different software version.
2. Launch a web browser and enter the IP address of the EAP in the address bar. The login
page will appear. By default, both the username and password are admin.
Tips:
To facilitate access to the EAP, you can set a static IP address for the EAP and remember it well or
write it down. But make sure that this IP address is not being used by other devices in the same LAN.
For detailed instructions about how to set a static IP address for the EAP, refer to
6.2 Manage the
IP Address of the EAP
.
Loading ...
Loading ...
Loading ...