Loading ...
Loading ...
Loading ...
12
If you connect to the Main AP (the one connected to your router) of a Bridge kit product,
the system will automatically scan for the Sub-AP(s) in the kit and connect it/them to the
network.
5. Enjoy the internet!
Now you can connect your phones, tablets and laptops to the new WiFi and surf the
internet.
Note:
If you cannot access the internet, follow the FAQ to troubleshoot the problem.
• Method 3: Set Up via a Web Browser (for a PC connected to EAP via Ethernet)
1. Get the IP address of the EAP. There are two methods.
• Using the DHCP Client List of the Gateway/Router
Log in to your gateway/router which acts as the DHCP server. In the DHCP client list,
find the IP address of your EAP according to its MAC address. The MAC address can
be found at the bottom of the EAP. In the following figure, for example, the IP address of
the EAP is 192.168.0.118.
Note:
When the DHCP server is not available in your network, the EAP has the DHCP fallback IP
address, which is 192.168.0.254 by default.
• Using the EAP Discovery Utility
Loading ...
Loading ...
Loading ...