Loading ...
Loading ...
Loading ...
Usingthe StableSound® feature
The StableSound feature limits the highest volume level
to prevent extreme changes in volume when the signal
source changes (for example, to prevent the sudden
increase in volume that often happens when a TV
program switches to a commercial).
1 From the SOUND menu, highlight StableSound
2 Press < or • to select On, then press EXT.
Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the DIGITAL
AUDIO OUT terminal on the TV.
1 Tune to a digital source on the ANT/CABLE input.
2 From the SETUP menu, highlight AV Connection
and press @.
3 Press • or • to select Digital Audio Output.
4 Press < or • to select Auto or PCM, then press %w
Auto: this mode outputs Dolby Digital or PCM to
the digital audio output socket providing it is being
broadcast.
PCM: this mode outputs PCM format to the digital
audio output socket.
Usingthe Dolby® Digital Dynamic
RangeControlfeature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing you
to switch from digital to analog broadcasts at the same
dynamic range.
1 From the SOUND menu, highlight Dynamic Range
Control.
2 Press < or • to select On, then press EXT
Note:
Setting the PIN code
A PIN code is necessary for some menus.
Registeringa newPINcode
1 From the PREFERENCES menu, highlight PIN
Setting and press @. A new screen will display.
2 Press number buttons to enter a four-digit number.
Reenter the PIN code to confirm it.
Changingor deletingyourPINcode
1 From the PREFERENCES menu, highlight PIN
Setting and press @. A new screen will display.
2 Press number buttons to enter your four-digit PIN
code.
• Change PIN
Highlight Change PIN and press @.
• Delete PIN
Highlight Delete PIN and press @.
If you delete the PIN code, the settings of Parental
Control and Locks are reset.
If youcannotrememberyourPINcode
While the PIN code entering screen is displayed, press
RE_LLfour times within five seconds. The PIN code ;viii
be cleared and you can enter a new PIN code.
43
Loading ...
Loading ...
Loading ...