Loading ...
Loading ...
Loading ...
Setting channel skip
To prevent certain channels from being viewed,
channel positions can be skipped.
1 From the SETUP menu, highlight TV Settings and
press @.
2 Press • or • to select Channel Options and press
@. The list of channels will appear.
3 Press • or • to select a channel position to be
skipped and press @. A tick will appear in the box.
To remove the tick, press @ again.
Note: Skipped channels cannot be selected with _ or _j,
however, they can still be accessed using the number keys
on the remote control.
Setting video input skip
If you set a video input source to be skipped, it will be
skipped over when selecting the input by repeatedly
pressing _D.
To turn on the skip:
1 Tune to the video input source to be skipped.
2 From the SETUP menu, highlight Manual Setting
and press @. The setting window will appear.
3 Press • or • to select _ (skip on) and press ?w
To turn offthe skip:
1 Select the video input that is set to skip by direct
number entry or by using • or • and then press 0.
2 From the SETUP menu, highlight Manual Setting
and press 0. The setting window will appear.
3 Press • or • to select _ (skip off) and press _w
Labeling video input sources
You can label video input sources.
1
2
3
Tune to the input you want to label.
From the SETUP menu, highlight Manual Setting
and press @. The setting window will appear.
Press • to move from the skip selection in order to
select a label, and press• or • to put in the desired
characters and press @.
4 Repeat steps 1 through 3 for other inputs.
5 To save your settings, press @.
Note: Available characters are O- (,), * +, -, and/.
29
Loading ...
Loading ...
Loading ...