Loading ...
Loading ...
Loading ...
Adjusting the picture
Selectingthe picturemode
You can select your desired picture settings from the
following modes, as described below.
Automatically adjusts picture settings
AutoView'* based on ambient light conditions and
input signal content
Sports Bright and dynamic picture
Standard Standard picture settings
Movie Lower contrast for darkened room
Designed for playing a video game
Game requiring split-second timing between
the on-screen display and input from
the controller
PC Designed for viewing of PC tables and
documents
Note:
• Because the AutoView mode automatically adjusts
picture settings based on ambient light conditions and
input signal content, some menus will be grayed out
when it is selected.
• PC mode is available for HDMI and PC inputs only (not
displayed for other input soumes).
• Game mode cannot be turned on when theANT/
CABLE input is selected.
1 From the PICTURE menu, highlight Picture Mode.
2 Press _ or • to select the picture mode you prefer
and press _.
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
Adjustingthe picturequality
The picture quality you adjusted under a certain picture
mode is saved to the picture mode of same name.
Backlight* darker lighter
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
* This feature adjusts the brightness of the entire screen.
When in video mode and no signal is input, this will
automatically be set to O. (Settings are stored in memory.)
Note: Some menus cannot be adjusted when the picture
mode is set to AutoView or TheaterLock is set to On.
To adjust the picture quality:
2
From the PICTURE menu, highlight picture quality
you want to adjust (Backlight, Contrast,
Brightness, Color, Tint, or Sharpness).
Once you select the desire item, press < or • to
adjust the setting, as described in the table above
and then press E×'c].
Note: The picture quality you adjusted affects the current
input only. You can adjust the picture quality for each input
and source for photo viewing.
To revel1 to the factory defaults:
1 Select the picture mode you want to reset.
2 From the PICTURE menu, highlight Reset and
press _.
3 A confirmation message will appear. Press "4 or • to
select Yes, and then press _.
39
Loading ...
Loading ...
Loading ...