Loading ...
Loading ...
Loading ...
Connectinga digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs a
Dolby ®* Digital _Do_,_yor 2-channel down-mixed PCM
(pulse-code modulation) signal for use with an external
Dolby ® Digital decoder or other external audio system
with optical audio input.
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller
"mini-optical" connector.)
-_ Dolby Digitaldecoder or
otberdigJtaJaudiosystem J ,._, J
TV upper back panel
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press M_uon the remote control to open the SETUP
menu.
3 Press • or • to select AV Connection and press _.
4
Press • or • to select Digital Audio Output, and
then press _ or • to select either Auto or PCM
(_ "Selecting the optical audio output format" on
page 43).
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTX
• The DIGITAL AUDIO OUT terminal may not output
some digital audio sources because of copy
restrictions.
° The Dolby Digital format is only available when tuned to
a digital RF channel
* Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.
Connectingan audiosystem
This connection allows you to use external speakers
with an external analog audio amplifier to adjust the
sound level.
You will need:
• standard audio cables
--_ nalogaudioamplifier _]
I
To control the audio:
1 Turn on the TV and the stereo amplifier.
Minimize the sound volume from the TV's built-in
speakers and control the volume level using the
amplifier's remote control.
17
Loading ...
Loading ...
Loading ...