Loading ...
Loading ...
Loading ...
Problem solving guide
94
Problem Cause and remedy
The browning of the
baked goods is uneven.
The wrong temperature or shelf level was selected.
There will always be a slight unevenness in
browning. If browning is very uneven, check
whether the correct temperature and shelf level
were selected.
The material or colour of the bakeware is not suitable
for the oven function selected.
When using the Conventional heat function, light
coloured, shiny tins will not produce as desirable
results. Dark, matt tins are best for baking.
There is still soiling in
the oven compartment
after a pyrolytic clean-
ing programme.
The pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
Remove the ash using a damp microfibre cloth or
with a clean sponge and a solution of hot water
and washing-up liquid.
If there is still coarse soiling left in the oven after
the pyrolytic cleaning programme you should start
the programme again, selecting a longer duration if
necessary.
The accessories make
noises when being
pushed into or pulled
out of the oven.
The pyrolytic resistant surface of the side runners
creates friction when accessories are being pushed
into or pulled out of the oven.
To reduce the friction, add a few drops of heat
resistant cooking oil to some kitchen paper and
use this to lubricate the side runners. Repeat this
after every pyrolytic cleaning programme.
The oven interior light-
ing switches off after a
short time.
You have selected theLighting| “On” for 15 seconds
setting.
If you want the oven interior lighting to be
switched on during the entire cooking programme,
select theLighting| On setting.
The oven interior light-
ing is off or does not
switch on.
You have selected theLighting| Off setting.
Press the sensor control to switch on the oven
interior lighting for 15seconds.
If required, select theLighting| On or“On” for 15
seconds setting.
The oven interior lighting is faulty.
Call the Miele Customer Service Department.
Loading ...
Loading ...
Loading ...