Loading ...
Loading ...
Loading ...
Settings
40
Running a RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele app.
A message will appear in your oven
display if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is switched on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
- Some software updates can only be
carried out by the Miele Customer
Service Department.
Software version
The software version is intended for the
Miele Customer Service Department.
You do not need this information for
domestic use.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. This setting is not needed
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode is activated. The appliance will
not heat up will appear when you
switch the oven on.
- On
Touch the OKsensor control for at
least 4seconds to activate demo
mode.
- Off
Touch the OKsensor control for at
least 4seconds to deactivate demo
mode. You can use the oven as
normal.
Factory default
- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- User programmes
All User programmes will be deleted.
- Recommended temperatures
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Loading ...
Loading ...
Loading ...