Loading ...
Loading ...
Loading ...
Control Pad Functions READTHE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN_ For
.............. _atisf_<Ebf_b--Qr o_/erf, become familiarwith the various functions of the
oven as described below
CLEAR PAD-- Used to
cancel any function
previously entered
except the time of day
and minute timer.
Push CLEAR to stop
cooking,
BAKE PAD--
Used to enter
the normal
baktng mocJe
temperature
VARI BROIL
PAD _-- Used
to select the
variable broil
function
CLEAN PAD_
Used to select
the self-
cleaning cycle
UPand bO'_JN'ARROW PADS" Used along with the
function pads to select oven temperature, cooking time,
, stop time ('when programming an automatic stop time),
: _ time of day,'dean time and minutetimer_!i::':, : ,.
OVEN, PRE,.HEAT & LOCK LIGHTS_
The "OVEN" light vvili glow each time
the oven burner turns on to ma!nta!n the
set oven temperature The "PREHEAT"
light will glow when the oven is first set
to operate, or if the desired temperature
is reset higher than the actual oven
temperature The "LOCI(" light wilt flash
until the door Iocks when the self<lean
cycle is in use It glows constantly after
the door locks.
TIMER ON/OFF
PAD_ Used to set
or cancel the
minute timer The
minute timer does
not start o_ stop
cooking
CLOCK PAD_ Used
to set the time of day.
FEA:TLIRE
INDICATOR
LIGHTS_ These,
light to show which
feature is in use.
BAKE TIME PAD--
Used to enter the
length of the baking
time
STOP TIME PAD_
Used to set the desired
stop time for baking
Can be used with BAKE
TIME to program a
delayed bake cycle,
The oven can be programmed to:
Bake normatly
, Time bake
o Vari Broil
Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed if desired, the controls can be programmed for
silent operation Push and hold STOP TIME. After 7 seconds, tile control witt beep once This wiI[ block the controls from
sounding when a pad is pushed To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard
Note: The control wilt return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control isset to operate in °F (fahrenheit) when shipped from the factory The oven can be
programmed for any temperature from t70% to 550°F (65°C to 287°C)
To change the temperature to °C (Ce!sius) or from °C to °F (cantro[ should not be in a Sake or Clean mode):
1 PushVARI BROIL .... appears in the display
2. Push and hold the UP ARROW until "Hi ° appears in the display
3 Push and hold VARI BROIL until °For °C appears in the display
Push the UP or DOWN ARROW to change °F to °C or °C to °F
Push any function pad to return to normal operating mode
Loading ...
Loading ...
Loading ...