Loading ...
Loading ...
Loading ...
Changing Cooktop and/
or Oven Lights
(some models)
_Be sure the range is
unplugged and al! parts are COOL
before replacing the surface or oven
lighSl Wear a leather-faced glove for
protection against possible broken
glass,,
r
To Change the Cooktop Light (some models)
1, Turn power off at the main source or unplug the range.
2, Remove Phillips@ Head screws (2) that secure the light cover and then lift
the light cover off,
3_ Remove bulb by rolling back and up. install the new bulb by sliding down
and rolling forward into place,
4. Re-install light cover and secure with Phillips@ Head screws (2)°
To Change the Oven Light (some models)
On some models, the oven light automatically turns on when the door is
opened_Some models have a s_ttch located on the control panel to turn on the
light. The oven light is located at the rear of the oven and is covered witl_ a
glass shield held by a wire holder. The glass shield must be in place ,whenever
the oven is in use.
To replace the oven light:
t. Turn electrical power off at the main source or unp!ug the rar_ge..
2. Presswire holder to one side to release the glass shield
3. Replace bulb with a new :40 watt appliance bulb.
4. Replace glass shield, ove_ bulb,a_d.sBap,_wire holder into place.
5. Turn power back on aga n at"tRe ma "fi source (oi_ plug t_e range back in).
6, The clock(if equipped) will then need to be reset, To reset, see Setting the
Clock and Minute Timer in this Owner's Guide
Cdjusting Oven
Note: The adjustments made will not
change the self-cleaning temperature
The temperature in the oven has been set at the factory When first using the
oven, be sure to follow recipe times and temperatures, if you think the oven is
too hot or too cool, the temperature in the oven can be adjusted, Before
adjusting, test a recipe by using a temperature setting that is higher or lower
than the recommended temperature, The baking results should help you to
decide how much of an adjustment is needed,
To Adjust Oven Temperature:
1 Push BAKE,
2 Setthe temperature to 550°F (287°C) by pushing and holding the UP ARROW.
3, Within 2 seconds, push and hold _AKE until the special 2 digit display
appears. ReleaseBAKE The display now indicates the amount of degrees
offset between the original factory temperature setting and the current
temperatu/'e setting If the oven control has the original factory calibration,
the display will _ead "00"
4 The temperature can now be adjusted up or down 35°F (t 7°C), in 5°F (i °C)
steps, by pushing and holding the UP or DOWN ARROW_ Adjust until the
desired amount of offset appears in the display.
5 When you have made the desired adjustment, push CLEAR to go back to
the time of day display When adjusting oven temperature, a minus sign (-)
will appear before the number to indicate that the oven will be cooler by
the displayed amount of degrees
t8
Loading ...
Loading ...
Loading ...