Loading ...
Loading ...
Loading ...
i
R
PROBLEM SDLUTmON
For most concerns, try these first. , Check if avon controHshave been properHyset=
, Check to be sure pHugis secureHyinserted into receptacle.
, Check or re-set circuit breaker. Check or repHacefuse.
, Check power suppHy.
Part or all of appliance does not
work.
Clock, indicator words, and/or
lights operate but oven does
not heat.
Oven light and/or clock
does not function.
Baking results are not as
expected or differ from
previous oven.
Food is not broiming properly or
smokes excessively.
Food is not broiling properly or
smokes excessively.
Oven will not self-clean.
Check
Check
Check
Check
Check
if surface and/or oven controHshave been properly set. See pages 4 & 8.
if oven door is unHockedafter seHf-cHeancyclic. See page 20.
if oven is set for a deHayedcook or dean program. See pages 12 & 19.
if Control Lock is activated. See page 9.
if control is in Sabbath Mode. See page 16=
, Oven may be set for a Cook & Hold or Delay function.
° The Control Lock may have been set. See page 9.
, The light bulb is loose or defective.
, The oven light does not work during self-cleaning process.
, Oven may be in Sabbath Mode. See page 16=
Make sure the oven vent has not been blocked. See page 17 for location.
Check to make sure range is level.
Temperatures often vary between a new oven and an old one. As ovens age. the oven
temperature often "drifts" and may become hotter or cooler. See page 16 for
instructions on adjusting the oven temperature. NOTE: It is not recommended to
adjust the temperature if only one or two recipes are in question.
See "Cooking Made Simple" booklet for more information on bakeware and
baking.
Check oven rack positions. Food may be too close to element.
Broil element was not preheated.
Aluminum foil was incorrectly used. Never line the broiler insert with foil.
Oven door was closed during broiling. Leave the door open to the first stop position
_about 4 inchesD.
Trim excess fat from meat before broiling.
A soiled broiler pan was used.
Voltage in house may be low.
Check oven rack positions. Food may be too close to element.
Broil element was not preheated.
Aluminum foil was incorrectly used. Never line the broiler insert with foil.
Oven door was closed during broiling. Leave the door open to the first stop
position Cabout4 inches[).
Trim excess fat from meat before broiling.
A soiled broiler pan was used.
Voltage in house may be low.
, Check to make sure the cycle is not set for a delayed start. See page 19.
° Check if door is closed.
° Check if control is in Sabbath Mode. See page 16.
° Oven may be over 400° F. Oven temperature must be below 400° F to program a
clean cycle.
25 cont.
Loading ...
Loading ...
Loading ...